Run Your Electric Meter Backwards!
It doesn’t get any simpler than this. This new concept in generating your own renewable energy performs much like any large electrical appliance, but instead of taking electrical power FROM an outlet, you put electricity INTO the outlet! If at any time your wind system is producing more energy than you are using, your electric meter will run backwards reducing your electric bill. If your electrical loads are larger than the wind generator production, your meter will slow down reflecting your reduced need to buy electricity at retail from the utility. You get up to 10 kilowatts from the new Ventera VT10 wind turbine and can add 2 kilowatts from solar photovoltaics 100% of which goes directly to reduce your electric bill by means of our exclusive inverter package.
Designed to Pay for Itself
Few things in this life are free, but you might agree our new Ventera VT10 wind system comes pretty close. Designed for at least a 30 year life and minimum maintenance, the Ventera wind turbine on an 80 foot tower can produce $2000 or more worth of electricity per year, electricity you would otherwise have to buy, if your wind regime is 12.5mph-5.5m/s (class III) or better and you pay 8 cents or more for electricity. In not much more than 10 years you’ll have earned back your original investment and in 30 years you could pocket 3 times or more the original investment! If you assume electric rates will go up in the coming years, and many predict they’ll go up faster than the rate of inflation, you’ll earn back your investment even faster. If you can depreciate the wind turbine cost as a farm or business expense, your payback will be even sooner. If your average wind speed is greater than 12.5 mph-5.5m/s, which is true for many sites in the US Midwest, your payback can be sooner yet. And, some states offer tax credits for small wind systems reducing the payback time even further. Careful design of every component and advanced tooling and manufacturing processes bring the initial cost of the Ventera turbine, inverter package and tower to historic lows. The frame is an aluminum casting (made from environmentally friendly recycled aluminum), not an expensive weldment. The downwind orientation eliminates the need for a costly and cumbersome tail. The blades are injection molded for low cost and absolute uniformity. The brushless, one-moving-part, large diameter alternator minimizes the use of copper, steel and rare earth magnet material. Our system utilizes a common power handling stage to bring you grid connection at an unheard of low price.